and Adjustment
4.14.4 CARRIAGE
1. Scanner Upper Cover (page 4-90 "Scanner Upper Cover")
2. Move carriage [A] to the right.
3. Slide the bracket [B] as shown below to detach the belt [A] from the pulley.
4. Bracket [C] ( x3)
5. Carriage [A] (
x1)
In the area [C], the flat cable [B] is fixed with double-sided tape. Do not try to strip the
flat cable [B] off by force.
6. Remove the shaft [B] from the carriage [A].
To Next Page
Loading...
