SP Mode Tables
3.11 PRINTER SERVICE MODE
3.11.1 SP1-XXX (SERVICE MODE)
1001 [Bit Switch]
001 Bit Switch 1 Settings 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 DFU - -
bit 3 No I/O Timeout Disabled Enabled
Enables/Disables MFP I/O Timeouts. If enabled, the MFP I/O Timeout
setting will have no affect. I/O Timeouts will never occur.
bit 4 SD Card Save Mode Disabled Enabled
If this bit switch is enabled, print jobs will be saved to the GW SD slot and
not output to paper.
bit 5 DFU - -
bit 6 DFU - -
bit 7 [RPCS,PCL]: Printable area frame border Disabled Enabled
Prints all RPCS and PCL jobs with a border around the printable area.
To Next Page
Loading...
