Ricoh M160 - Weekly Timer

Energy Save
M160/M161 7-2 SM
Weekly Timer
(System settings > Timer Settings > Weekly Timer)
Specify the time when the machine switches to and from Off mode or Sleep mode. This timer can
be set for Monday through Sunday. You can set up to six timer settings a day.
Default: [Inactive]
If you select [Daily] or [Day of the Week], specify [Weekly Timer Code], [Weekly Timer Schedule],
or [Timer Suspension Period].
 Weekly Timer Schedule
 Weekly Timer 1 to 6
 Event
 Enter Sleep Mode
 Cancel Weekly Timer Code
 Power Off
 Power On
 None
Default for "Event": [None]
If an event is selected, enter the time for the event in "Event Timer".
 Timer Suspension Period
Set the dates for [Start Date] and [End Date] using the number keys.
If the Weekly Timer setting is specified, you can set a password (using up to eight digits) for when
the machine recovers from Off mode or Sleep mode. After the password has been registered, the
screen requiring the password is displayed when you press the [Energy Saver] key or [Check
Status] key during Off mode or Sleep mode. The machine will recover from Off
mode or Sleep
mode when you press the [Energy Saver] key or [Check Status] key after entering the password. If
you select [Off], you do not have to enter a password to recover the machine from Off mode or
Sleep mode.
If the Timer Suspension Period timer has been set and the machine's main power switch is not
turned on at the date specified for [End Date] in [Timer Suspension Period], the Power On timer
will not be performed although the Timer Suspension Period term expires. To enable Power On
timer, you need to turn the main power switch on manually.