Ricoh M160 - Scanner Sp Mode; Sp1-XXX (System and Others)

Scanner SP Mode
M160/M161 3-228 SM Appendix
3.12 SCANNER SP MODE
3.12.1 SP1-XXX (SYSTEM AND OTHERS)
1001 [Scan Nv Version]
1-001-005
- C* -
1005
[Erase margin]
Creates an erase margin for all edges of the scanned image.
If the machine has scanned the edge of the original, create a margin. This
SP is activated only when the machine uses TWAIN scanning.
1-005-001
Range from 0 to 5
mm
C* [0 to 5 / 0 / 1 mm/step]
1009
[Remote scan disable]
Enable or disable remote scan.
1-009-001 0:Enable 1:Disable C*
[0 or 1 / 0 / - ]
0: enable, 1: disable
1010
[Non Display Clear Light PDF]
Enable or disable remote scan.
1-010-001 0:Enable 1:Disable C*
[0 or 1 / 0 / - ]
0: Display, 1: No display
1011
[Org count Disp]
Selects the original counter display.
0: Displays remaining memory for the original scanning..
1: Displays original counter.
1-011-001 0:ON 1:OFF C* [0 or 1 / 0 / - ]