Bluetooth Interface Unit Type D
M160/M161 2-64 SM
2.17.2 INSTALLATION PROCEDURE
Unplug the main machine power cord before you do the following procedure.
Do not remove the Bluetooth unit while the power of the machine is on.
You can only install one of the following network interfaces at a time: (IEEE a/b/g/n (Wireless LAN),
Bluetooth).
1. Insert the Bluetooth Interface adapter into the USB connector .
2. Plug in the power cord, and then turn on the machine.
3. Print the configuration page to confirm the installation (page 2-17 "Printing a
Configuration Page").
Confirm that the Bluetooth interface unit was correctly installed by printing the
configuration page. If it is correctly installed, "Bluetooth" will appear for "Device
Connection" on the configuration page.
To Next Page
Loading...
