SD Card Appli Move
M160/M161 2-26 SM
2.5.5 UNDO EXEC
"Undo Exec" (SP5-873-002) lets you move back application programs from an SD card in SD
Card Slot 1 (upper) to the original SD card in SD Card Slot 2 (lower). You can use this program
when, for example, you have mistakenly copied some programs by using Move Exec
(SP5-873-001).
Do not turn ON the write protect switch of the system SD card or application SD card on
the machine. If the write protect switch is ON, a download error (e.g. Error Code 44)
occurs during a firmware upgrade or application merge.
1. Turn the main power switch off.
2. SD card slot cover [A].
3. Insert the integrated SD card in Slot 1 [A].
4. Insert the SD card which became empty after integration in Slot 2 [B].
5. Turn the main power switch on.
6. Start the SP mode.
To Next Page
Loading...
