Browser Unit Type M6
M160/M161 2-38 SM
3. Turn the main power switch on.
4. After the Update screen is displayed, select the “Browser”.
5. Touch "Update (#)”.
6. After the "Update Done" message appears on the screen, turn the main power switch
OFF.
7. Remove the SD card from the lower slot.
2.8.6 UPDATING THE EXTENDED JAVASCRIPT
Do the following steps if you are updating the Extended JavaScript.
1. Turn the main power switch on.
2. Push the [User Tools/Counter] key.
3. Touch "Extended Feature Settings" twice on the LCD.
4. Change the status of “Extended JS” to “Ending” in the Startup Settings tab.
5. Turn the main power switch OFF.
6. Insert the SD card containing the Extended JS firmware into SD slot 2 (lower).
7. Turn the main power switch on.
8. Push the [User Tools/Counter] key.
9. Touch "Extended Feature Settings" twice on the LCD.
10. Touch the “Install” tab.
11. Touch “SD card”, then select “Extended JS” from the list of Extended Features.
12. Select “Machine HDD” as the “Install to” destination, then touch “Next”.
13. Check the Extended Features information on the “Ready to Install” screen, then press
“OK”.
14. After “The following extended feature has already been installed. Are you sure you
want to overwrite it?” is displayed, press “Yes”.
15. Change the status of Extended JS to “waiting” in the Startup Settings tab.
16. Turn the main power switch OFF.
17. Remove the SD card from slot 2 (lower slot).
18. Turn the main power switch ON.
To Next Page
Loading...
