VM Card Type W
M160/M161 2-42 SM
2.10 VM CARD TYPE W
2.10.1 COMPONENT CHECK
No. Description Q'ty
1 SD Card: VM Card 1
2.10.2 INSTALLATION PROCEDURE
To install the VM card, Hard Disk Drive Option Type M6 and Memory Unit Type M1 must first be
installed.
1. Press the [User Tools/Counter] key to display System Settings>Timer Settings, and
then set [Sleep Mode Timer] to five minutes or longer.
This will prevent the machine from switching to the Sleep mode while installing Java TM
Platform.
2. Turn off the main power, and then disconnect the power cord.
3. Loosen the screw and remove the SD card slot cover at an angle.
4. Insert the SD card (VM Card) in SD slot 1 (upper). Then push it slowly until it clicks.
To Next Page
Loading...
