Ricoh M160 - Main Sp Tables-4; Sp4-XXX (Scanner)

Main SP Tables-4
SM Appendix 3-27 M160/M161
Appendices:
SP Mode Tables
3.5 MAIN SP TABLES-4
3.5.1 SP4-XXX (SCANNER)
4008
[Sub Scan Mag.Adjustment]
Adjusts the sub-scan magnification by changing the scanner motor speed.
4-008-001 - E* [-1.0 to 1.0 / 0.0 / 0.1%/step]
4010
[L-Edge Regist Adjustment]
Adjusts the leading edge registration for scanning.
4-010-001 - E* [-1.0 to 1.0 / 0.0 / 0.1mm/step]
4011
[S-to-S Regist Adjustment]
Adjusts the side-to-side registration by changing the scanning start timing in
the main scan direction.
4-011-001 - E* [-2.0 to 2.0 / 0.0 / 0.1mm/step]
4012
[Scanner Erase Margin: Scale]
Adjusts scanning margins for the leading and trailing edges (sub scan) and
right and left edge (main scan).
 Do not adjust unless the customer desires a scanner margin
greater than the printer margin.These settings are adjusted to
erase shadows caused by the gap between the original and the
scale of the scanner unit.
4-012-001 Book: Leading Edge E* [0.0 to 3.0 / 1.0 / 0.1mm/step]
4-012-002 Book: Trailing Edge E* [0.0 to 3.0 / 0.0 / 0.1mm/step]
4-012-003 Book: Left E* [0.0 to 3.0 / 1.0 / 0.1mm/step]
4-012-004 Book: Right E* [0.0 to 3.0 / 0.0 / 0.1mm/step]