Ricoh M160 - Ip-Fax Specifications

IP-Fax Specifications
SM 162 M160/M161 Fax Option
6.4 IP-FAX SPECIFICATIONS
Network:
Standard: Ethernet interface (1000 Base-T/100 Base-TX/10
Base-T)
Optional: IEEE802.11a/b/g/n wireless LAN interface
Scan line density:
8 x 3.85 lines/mm, 200 x 100 dpi (Standard character)
8 x 7.7 lines/mm, 200 x 200 dpi (Detail character)
Maximum Original
size:
Standard: A4 (SEF) or 8.5" x 14" (SEF)
Custom: 216 mm x 600 mm (8.5” x 23.6”)
Maximum scanning
size:
216 mm x 600 mm (8.5” x 23.6”)
Transmission
protocol:
Recommended: T.38, TCP, UDP/IP communication, SIP (RFC
3261 compliant), H.323 v2
Compatible
machines:
IP-Fax compatible machines
IP-Fax transmission
function:
Specify an IP address and send faxes to an IP-Fax compatible
fax through a network.
Also capable of sending faxes to a G3 fax connected to a
telephone line via a VoIP gateway.
IP-Fax reception
function:
Receive faxes sent from an IP-Fax compatible fax through a
network.
Also capable of receiving faxes from a G3 fax connected to a
telephone line via a VoIP gateway.