Preparation
1. Extract the exe file (XXXX. exe), after which the following two files are generated:
XXXX_machine. exe/ XXXX_stock.exe.
Note: The file (XXXX_machine) is for updating the EXJS firmware in the field.
2. Extract the file (XXXX_machine), after which the “SDK” folder is created.
Note: XXXX = part number.
3. Copy the “SDK” folder to an SD card.
Main procedure
Unplug the main machine power cord before you do the following procedure.
1. Loosen the screw and remove the SD card slot cover at an angle.
2. Insert the SD card included for firmware update into SD slot 2 (lower). Then push it
slowly until it clicks.
To Next Page
Loading...
