Controller Options
M160/M161 2-22 SM
2.4 CONTROLLER OPTIONS
2.4.1 OVERVIEW
Always touch a grounded surface to discharge static electricity from your hands before
you handle SD cards, printed circuit boards, or memory boards.
The machine is equipped with a USB host interface, I/F card slot, and SD card slots for controller
options.
Remove the SD card slot cover to use the SD card slots.
USB Host Interface
Use the USB host interface [A] for connecting the Bluetooth interface unit.
I/F Card Slot
Slot [B] can be used to attach an interface for IEEE 1284, IEEE 802.11a/b/g/n (Wireless LAN),
or File Format Converter.
SD Card Slots
Slot 1 (upper) [C] is used for optional applications (e.g.: Netware, Postscript3, Browser Unit,
etc).
Slot 2 (lower) [D] is used for installing applications, or for service only (for example, updating
the firmware).
To Next Page
Loading...
