Main Machine Installation
M160/M161 2-18 SM
2.2.6 MOVING THE MACHINE
It is dangerous to handle the power cord plug with wet hands. Doing so could result in
electric shock.
Unplug the power cord from the wall outlet before you move the machine. While moving
the machine, take care that the power cord is not damaged under the machine. Failing to
take these precautions could result in fire or electric shock.
If you have to move the machine when the optional paper tray unit is attached, do not
push on the main unit's top section. Doing so can cause the optional paper tray unit to
detach, possibly resulting in injury.
When disconnecting the power cord from the wall outlet, always pull the plug, not the
cord. Pulling the cord can damage the power cord. Use of damaged power cords could
result in fire or electric shock.
The machine weighs approximately 23 kg (50.7 lb.). When moving the machine, use the
inset grips on both sides, and lift slowly in pairs. The machine will break or cause injury if
dropped.
Do not hold the control panel while moving the machine. Doing so may damage the
control panel, cause a malfunction, or result in injury.
To Next Page
Loading...
