Updating the Firmware
M160/M161 5-8 SM
key/ screen description
What it means
[Exit] (or the [0]
key)
Return to the normal operation screen.
[Start] key Select all the firmware.
[Clear] Cancel your selections.
Verify (or the (./*)
key)
Update the ROM of the selected firmware.
Update (or the
key)
Check for an error in the selected firmware.
NEW:
Number of the module and name version on the SD card. The
first line is the module number, the second line the version
name.
ROM:
Number of the module and name of the version currently
installed. The first line is the module number, the second line
the version name.
Controller, engine and operation panel firmware cannot be updated at the same time.
It is recommended to update firmware modules one by one.
8. With the selected items shown in reverse color, push the [Update] button or the [#] key
on the operation panel to start the update.
After you push [Update], following screen appears.
To Next Page
Loading...
