SC No. Level Error Name/Error Condition/Major Cause/Solution
SC839-00 D
Self-diagnostic Error: Serial Flash
[XXXX]: Detailed error code
[9001]
USB NAND Flash ROM cannot be read.
Defective controller board
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC840-00 D
EEPROM access error
While executing I/O to the EEPROM, an error is detected:
When a read error still occurs even after three attempts;
When a write error has occurred.
EEPROM is defective or has reached its end of life.
-
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC841-00 D
Error in data read from the EEPROM
When mirrored data read from three different regions in the
EEPROM differ each other.
For some reason, the data stored in a particular region of the
EEPROM has been overwritten.
-
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC842-00 C
Verification error in the NAND-Flash update
When updating the remote ROM and the ROM, SCS
encountered an error in writing to the NAND-Flash memory that
holds the module data.
Defective NAND-Flash memory.
Turn the main power switch off and on.
To Next Page
Loading...
