Ricoh M160 - Page 342

Service Call
M160/M161 6-98 SM
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC876-02 D
Log Data Error 2
An error was detected in the acquisition or configuration of the
log data at power on or during machine operation.
Log encryption is enabled but encryption module is not installed.
 Replace or re-install the encryption module.
 Disable the log encryption setting.
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC876-03 D
Log Data Error 3
An error was detected in the acquisition or configuration of the
log data at power on or during machine operation.
Inconsistency of encryption key between NV-RAM and HDD.
 Disable the log encryption setting.
 Initialize LCS memory (SP5801-019).
 Initialize the HDD (SP5-832-004).
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC876-04 D
Log Data Error 4
An error was detected in the acquisition or configuration of the
log data at power on or during machine operation.
 Log encryption key is disabled but the log data file is
encrypted.(NVRAM data corruption)
 Log encryption key is enabled but the log data file is not
encrypted.(NVRAM data corruption)
 Initialize the HDD (SP5-832-004).
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC876-05 D Log Data Error 5