Ricoh M160 - Page 422

Main SP Tables-1
SM Appendix 3-9 M160/M161
Appendices:
SP Mode Tables
1922
[Fact S-to-S Reg]
Reflects adjustment values with no change.
 To move the start position to the right, increase the value (+).
 To move the start position to the left, decrease the value (–).
1-922-001 By-pass E*
[-4.0 to 4.0 / 0.0 / 0.1mm/step]
1-922-002 Tray 1 E*
1-922-003 Tray 2 E*
1-922-004 Tray 3 E*
1-922-006 Duplex E*
[-4.0 to 4.0 / 0.0 / 0.1mm/step]
The value of this SP adds on to the
adjusted values of the front page of
each tray.
1952
[Fan Off Mode Time]
-
1-952-001 - E* [0 to 60 / 13 / 1min/step]