Main SP Tables-5
M160/M161 3-120 SM Appendix
5-845-008
IP Address (Secondary) C*
[ - / - / - ]
Sets the IP address that is given to the
computer that is the secondary delivery
server for Scan Router. This SP lets
you set only the IP address, and does
not refer to the DNS setting.
5-845-009
Delivery Server Model C*
[0 to 4 / 0 / 1/step]
Allows changing the model of the
delivery server registered by the I/O
device.
5-845-010
Delivery Svr. Capability C* [0 to 255 / 0 / 1/step]
Changes the capability of the registered that the I/O device registered.
Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address possible
Bit5 = 1 Mail RX confirmation setting possible
Bit4 = 1 Address book automatic update function exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set to ā0ā)
5-845-011
Delivery Svr. Capability
(Ext)
C*
[- / 00000000 / -]
Not in use. Reserved for SP5845-010.
5-845-013
Server Scheme (Primary) C*
[ Up to 6 char / - / -/step]
This SP is used for the scan router
program.
5-845-014
Server Port Number
(Primary)
C*
[1 to 65535 / 80 / 1/step]
This SP is used for the scan router
program.
5-845-015
Server URL Path (Primary) C*
[ Up to 16 byte / - / -/step]
This SP is used for the scan router
program.
5-845-016
Server Scheme
(Secondary)
C*
[ Up to 6 char / - / -/step]
This SP is used for the scan router
program.
To Next Page
Loading...
