SP Mode Tables
5-860-025 SMTP Auth. Direct Setting C*
[ - / 00000000 / -]
Occasionally, SMTP certification may
fail with encryption enabled for the
SMTP server. This can occur if the
SMTP server does not meet RFC
standards. In such cases you can use
this SP to set the SMTP certification
method directly. However, this SP can
be used only encryption has been
enabled.
Selects the authentication method for
SMTP.
Bit switch:
Bit 0: LOGIN
Bit 1: PLAIN
Bit 2: CRAM MD5
Bit 3: DIGEST MD5
Bit 4 to 7: Not used
5-860-026
S/MIME: MIME Header
Setting
C*
[0 to 2 / 0 / 1 /step]
Selects the MIME header type of an
E-mail sent by S/MIME.
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
5-860-028
S/MIME: Authentication
Check
C*
[0 or 1 / 0 / 1/step]
0: No (not check)
1: Yes (check)
Specifys whether to check destination
certificate when sending S/MIME mail.
To Next Page
Loading...
