Main SP Tables-7
M160/M161 3-156 SM Appendix
7-803-004 Sheets Trans. E*
7-803-005 Sheets Feed E*
7-803-006 Sheets Fric. Pad E*
7-803-012 Distance PCDU E*
[0 to 999999999 / 0 / 1mm/step]
7-803-013 Distance Fuser E*
7-803-014 Distance Trans. E*
7-803-022 Usage PCDU E*
[0 to 255 / 0 / 1%/step]
7-803-023 Usage Fuser E*
7-803-024 Usage Trans. E*
7-803-025 Usage Feed E*
7-803-026 Usage Fric. Pad E*
7804
[PM Counter Reset]
Clears the PM counter.
Press the Enter key after the machine asks “Execute?”, which will store the
PM counter value in SP7-906 (PM Counter - Previous) and reset the value
of the current PM counter (SP7-803) to “0”.
7-804-001 Paper C
[- / - / -]
[Execute]
7804
[Reset PM Counter]
Counter reset by execution SP.
7-804-002 PCDU E
[- / - / -]
7-804-003 Fuser E
7-804-004 Trans. E
7-804-005 Feed E
[- / - / -]
7-804-006 Fric. Pad E
7-804-010 Mentenance Kit E
To Next Page
Loading...
