SP Mode Tables
has been completed.
A printed fax report counts as one job for the F: counter.
The F: counter does not distinguish between fax sending or receiving.
When a copy job on the document server is printed, SP8-022 also increments, and when a
print job stored on the document server is printed, SP8024 also increments.
When an original is both copied and stored on the document server, the C: and L: counters
both increment.
When a print job is stored on the document server, only the L: counter increments.
When the user presses the Document Server button to store the job on the document server,
only the L: counter increments.
When the user enters document server mode and prints data stored on the document server,
only the L: counter increments.
When an image received from Palm 2 is received and stored, the L: counter increments.
When the customer prints a report (user code list, for example), the O: counter increments.
However, for fax reports and reports executed from the fax application, the F: counter
increments.
8011
[T:Jobs/LS] C*
[0 to 9999999 / 0 / 1/step]
These SPs count
the number of jobs
stored to the document server by each
application, to reveal how local storage
is being used for input.
The L: counter counts the number of
jobs stored from within the document
server mode screen at the operation
panel.
8012 [C:Jobs/LS] C*
8013 [F:Jobs/LS] C*
8014 [P:Jobs/LS] C*
8015 [S:Jobs/LS] C*
8016 [L:Jobs/LS] C*
8017 [O:Jobs/LS] C*
When a scan job is sent to the document server, the S: counter increments. When you enter
document server mode and then scan an original, the L: counter increments.
When a print job is sent to the document server, the P: counter increments.
When a network application sends data to the document server, the O: counter increments.
When an image from Palm 2 is stored on the document server, the O: counter increments.
When a fax is sent to the document server, the F: counter increments.
To Next Page
Loading...
