Ricoh M160 - Page 584

Main SP Tables-8
SM Appendix 3-171 M160/M161
Appendices:
SP Mode Tables
 When documents already stored on the document server are printed, the count for the
application that started the print job is incremented.
 When the print job is started from a network application (Desk Top Binder, Web Image Monitor,
etc.) the L: counter increments.
8041 [T:TX Jobs/LS] C* [0 to 9999999 / 0 / 1/step]
These SPs count the applications that
stored files on the document server that
were later accessed for transmission
over the telephone line or over a
network (attached to an e-mail, or as a
fax image by I-Fax).
Note: Jobs merged for sending are
counted separately.
The L: counter counts the number of
jobs scanned from within the document
server mode screen at the operation
panel.
8042 [C:TX Jobs/LS] C*
8043 [F:TX Jobs/LS] C*
8044 [P:TX Jobs/LS] C*
8045 [S:TX Jobs/LS] C*
8046 [L:TX Jobs/LS] C*
8047 [O:TX Jobs/LS] C*
 When a stored copy job is sent from the document server, the C: counter increments.
 When images stored on the document server by a network application or Palm2 are sent as
an e-mail, the O: counter increments.
8051 [T:TX Jobs/DesApl] C* [0 to 9999999 / 0 / 1/step]
These SPs count the applications used
to send files from the document server
over the telephone line or over a
network (attached to an e-mail, or as a
fax image by I-Fax). Jobs merged for
sending are counted separately.
The L: counter counts the number of
jobs sent from within the document
server mode screen at the operation
panel.
8052 [C:TX Jobs/DesApl] C*
8053 [F:TX Jobs/DesApl] C*
8054 [P:TX Jobs/DesApl] C*
8055 [S:TX Jobs/DesApl] C*
8056 [L:TX Jobs/DesApl] C*
8057 [O:TX Jobs/DesApl] C*
 If the send is started from Desk Top Binder or Web Image Monitor, for example, then the O:
counter increments.