Ricoh M160 - Page 586

Main SP Tables-8
SM Appendix 3-173 M160/M161
Appendices:
SP Mode Tables
8-06x-004 Booklet C*
[0 to 9999999 / 0 / 1/step]
Number of jobs started in Booklet
mode. If the machine is in staple mode,
the Staple counter also increments.
8-06x-005 Z-Fold C*
[0 to 9999999 / 0 / 1/step]
Number of jobs started In any mode
other than the Booklet mode and set for
folding (Z-fold).
8-06x-006 Punch C*
[0 to 9999999 / 0 / 1/step]
Number of jobs started in Punch mode.
When Punch is set for a print job, the P:
counter increments. (See SP8-064-6.)
8-06x-007 Other C*
[0 to 9999999 / 0 / 1/step]
(Reserved)
8-06x-008 Inside-Flod C* [0 to 9999999 / 0 / 1/step]
8-06x-009 Three-In-Fold C* [0 to 9999999 / 0 / 1/step]
8-06x-010 Three-OUT-Fold C* [0 to 9999999 / 0 / 1/step]
8-06x-011 Four-Fold C* [0 to 9999999 / 0 / 1/step]
8-06x-012 KANNON-Fold C* [0 to 9999999 / 0 / 1/step]
8-06x-013 Perfect-Bind C* [0 to 9999999 / 0 / 1/step]
8-06x-014 Ring-Bind C* [0 to 9999999 / 0 / 1/step]
8071
[T:Jobs/PGS]
These SPs count the number of jobs broken down by the number of
pages in the job, regardless of which application was used.
8072
[C:Jobs/PGS]
These SPs count and calculate the number of copy jobs by size based on
the number of pages in the job.
8073
[F:Jobs/PGS]
These SPs count and calculate the number of copy jobs by size based on
the number of pages in the job.