SP Mode Tables
For example: When a copy job stored on the document server is printed in document server
mode, the appropriate L: counter (SP8-076-0xx) increments.
Printing a fax report counts as a job and increments the F: counter (SP8-073).
Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.
If a job is paused and re-started, it counts as one job.
If the finisher runs out of staples during a print and staple job, then the job is counted at the
time the error occurs.
For copy jobs (SP8-072) and scan jobs (SP8-075), the total is calculated by multiplying the
number of sets of copies by the number of pages scanned. (One duplex page counts as 2.)
The first test print and subsequent test prints to adjust settings are added to the number of
pages of the copy job (SP8-072).
When printing the first page of a job from within the document server screen, the page is
counted.
8111 [T:FAX TX Jobs] C*
[0 to 9999999 / 0 / 1/step]
8113 [F:FAX TX Jobs] C*
8121 [T:IFAX TX Jobs] C*
8123 [T:IFAX TX Jobs] C*
8131
[T:S-to-Email Jobs]
These SPs count the total number of jobs (color or black-and-white)
scanned and attached to an e-mail, regardless of whether the document
server was used or not.
8135
[S: S-to-Email Jobs]
These SPs count the number of jobs (color or black-and-white) scanned
and attached to e-mail, without storing the original on the document
server.
8-13x-001 B/W C*
[0 to 9999999 / 0 / 1/step]
8-13x-002 Color C*
8-13x-003 ACS C*
To Next Page
Loading...
