OPTION
Check Point Action
7 Enable H.323/Enable SIP SW is set to on? Request the sender to check the
settings.
User Parameter SW 34 Bit 0/SW 34
Bit 1
Only if the remote sender fax
is a Ricoh fax.
8 Local fax IP address registered? Register the IP address.
9 Local fax Alias number registered? Register the Alias number.
10 Network bandwidth too narrow? Request the system administrator to
increase the bandwidth.
Lower the start modem reception baud
rate on the receiving side.
IPFAX SW06
11 Remote fax cancelled transmission? Check whether the remote fax
cancelled the transmission.
12 Local fax registered in Gatekeeper/SIP
server?
Contact the network administrator.
The sender machine displays
this error code when the
sender fax is a Ricoh model.
To Next Page
Loading...
