OPTION
Address Function Unit Remarks
680546
Country dial tone continuous
tone time
- -
680547
Country dial tone permissible
drop time
20 ms -
680548 Country dial wait interval (LOW)
680549
Country dial wait interval
(HIGH)
68054A
Time between opening or
closing the DO relay and
opening the OHDI relay
1 ms
See Notes 3, 6 and 8.
SP2-103-012 (parameter
11).
68054B Break time for pulse dialing 1 ms
See Note 3.
SP2-103-013 (parameter
12).
68054C Make time for pulse dialing 1 ms
See Note 3.
SP2-103-014 (parameter
13).
68054D
Time between final OHDI relay
closure and DO relay opening
or closing
1 ms
See Notes 3, 6 and 8.
SP2-103-015 (parameter
14).
This parameter is only valid
in Europe.
68054E
Minimum pause between dialed
digits (pulse dial mode)
20 ms
See Note 3 and 8.
SP2-103-016 (parameter
15).
68054F
Time waited when a pause is
entered at the operation panel
SP2-103-017 (parameter
16). See Note 3.
680550 DTMF tone on time
1 ms
SP2-103-018 (parameter
17).
680551 DTMF tone off time
SP2-103-019 (parameter
18).
To Next Page
Loading...
