OPTION
Switch 02
No FUNCTION COMMENTS
0 1 1 1 16800
1 0 0 0 19200
1 0 0 1 21600
1 0 1 0 24000
1 0 1 1 26400
1 1 0 0 28800
1 1 0 1 31200
1 1 1 0 33600
1 1 1 1 Disabled
Other settings: Not used
6 Not used Do not change this setting.
Switch 03
No FUNCTION COMMENTS
0-1 Inch-mm conversion before tx
Bit 1: 0, Bit 0: 0 = Inch-mm conversion
available
Bit 1: 0, Bit 0: 1 = Inch only
Bit 1: 1, Bit 0: 0 = Not used
Bit 1: 1, Bit 0: 1 = Disabled
If "inch only" is selected on the
machine uses inch-based
resolutions for scanning, the printed
copy may be slightly distorted at the
other end if that machine uses
mm-based resolutions.
If the setting is "Inch-mm conversion
available ", Inch-mm conversion
become effective to the special
senders.
If the setting is "Disabled", the bit
switch setting is used.
To Next Page
Loading...
