7. Tray 2 (option)
This tray can hold up to 500 sheets of plain paper.
8. Exposure Glass
Place originals here sheet by sheet.
9. Cover for the Exposure Glass
Open this cover to place originals on the exposure glass.
10. Right Cover
Open this cover when a paper jam occurs. To open this cover, first open the bypass tray.
11. Bypass Tray
Load paper here sheet by sheet.
You can attach a cover to the bypass tray to keep dust out. For details, see page 63 "Loading Paper into
Bypass Tray".
12. Tray 2 Right Cover
Open this cover when a paper jam occurs.
• When outputting 11 × 17 paper to the internal tray, remove it from the left side of the machine. Be
careful not to damage the paper against the prop on the left side of the internal tray.
Exterior: Rear View
1. Ethernet Port
For connecting the machine to the network using a network interface cable.
Installing a DDST unit allows you to use this.
1. Getting Started
14
To Next Page
Loading...
