3. Placing Originals
About Originals
This section describes the types of originals that can be placed and the parts of the original that are
chipped in the scanned copy.
Recommended Size of Originals
This section describes the recommended size of the original.
Exposure glass
Up to 297 mm (11.69 inches) in width, up to 432 mm (17.00 inches) in length
ADF
• Paper size: Up to 297 mm (11.69 inches) in width, up to 600 mm (23.62 inches) in length
• Paper weight: 52 to 128 g/m
2
(13.8 to 34 lb.)
• Only 1 sheet of original can be placed on the exposure glass at a time.
• Up to 40 sheets of A3 or 11 × 17 size originals, and up to 50 sheets of sizes other than A3 or 11
× 17 size originals can be placed at one time in the ADF (when using paper weighing 80 g/m
2
,
20 lb.).
Types of Originals Not Supported by the Auto Document Feeder
If placed in the ADF, the following types of original might be damaged or become jammed, or result in
gray or black lines appearing on prints:
• Originals larger or heavier than recommended
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, aluminum foil, carbon
paper, or conductive paper
• Originals with perforated lines
• Originals with indexes, tags, or other projecting parts
• Sticky originals such as translucent paper
71
To Next Page
Loading...
