Checking the System Information
Click [Home] to display the main page of Web Image Monitor. You can check the current system
information on this page.
This page contains three tabs: [Status], [Counter], and [Machine Information].
Status Tab
Item Description
Model Name Shows the name of the machine.
Location Shows the location of the machine as registered on the [SNMP] tab.
Contact Shows the contact information of the machine as registered on the [SNMP]
tab.
Host Name Shows the host name specified in [Host Name] on the [DNS] tab.
Device Status Shows the current messages on the machine's display.
Status
Item Description
Print Cartridge Shows the amount of toner remaining.
Paper Tray
Item Description
Tray 1 Shows the current state and paper size/type setting of Tray 1.
Tray 2 Shows the current state and paper size/type setting of Tray 2.
Tray 3 Shows the current state and paper size/type setting of Tray 3.
Bypass Tray Shows the current state and paper size/type setting of the bypass tray.
• If a non-genuine print cartridge is installed, toner life cannot be reliably indicated.
• The information about Tray 2 and 3 appears only when they are installed.
8. Configuring the Machine Using Web Image Monitor
162
To Next Page
Loading...
