Problem Solution
When copying from the exposure
glass, the print area of the copy is
out of alignment with the original.
Place the original copy side down, making sure that it is
aligned to the rear left corner and pressed flat against the
exposure glass.
When You Cannot Make Copies as Wanted
Problem Solution
Photocopied pages are not in
correct order.
On the control panel, change the [Sort] setting under copy
settings to collate pages as you require. For details about
[Sort], see page 138 "Copier Features Settings".
Copied pages are too dark or too
light.
Adjust the image density. See page 108 "Specifying the Scan
Settings".
10. Troubleshooting
214
To Next Page
Loading...
