Configuring the Administrator Settings
Click [Administrator Tools] to display the page for configuring the administrator settings.
This page contains the following tabs: [Administrator], [Reset Settings], [Backup Setting], [Restore
Setting], [Set Date/Time], and [Energy Saver Mode].
Administrator Tab
Administrator Settings
Item Description
New Password Enter the new administrator password. Can contain up to 16 characters.
Confirm New Password Enter the same password again, to confirm.
Reset Settings Tab
Reset Settings
Item Description
Reset Network Settings Select to reset settings configured under the [Network Settings] and
[Administrator Tools].
Reset Menu Settings Select to reset settings that are not related to the network to their defaults.
Clear Scan Destination Select to reset the scan destinations.
Reset IPsec Settings Select to reset the IPsec settings.
• [Reset IPsec Settings] appears only when the administrator password is specified.
Backup Setting Tab
• When sending the machine for repair, it is important that you create backup files in advance. The
machine's settings are returned to the default after repair.
8. Configuring the Machine Using Web Image Monitor
184
To Next Page
Loading...
