Basic Operation
• You must first specify a paper size and orientation. For details about specifying standard paper
sizes, see page 68 "Specifying the Standard Paper Size". For details about specifying custom
paper sizes, see page 68 "Specifying a Custom Paper Size".
• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
1. Press the [Copy] key.
2. Place the original on the exposure glass or in the ADF.
To place the original, see page 73 "Placing Originals".
If necessary, configure advanced photocopy settings.
3. Press the [ ] or [ ] key to select a paper tray.
4. To make multiple copies, enter the number of copies using the number keys.
5. Press the [Start] key.
• Specify a scaling ratio if the original is not the same size as the paper. For details, see page 79
"Making Enlarged or Reduced Copies".
4. Copying Originals
76
To Next Page
Loading...
