Separation Line
Item Description
Separation Line Specify whether or not to print a line through the copied document.
• The information about Tray 2 and 3 appears only when it is installed.
Priority Tray Tab
Priority Tray
Item Description
Printer Select the tray that the machine checks first for paper that can be used for
the job from [Tray 1], [Tray 2], [Tray 3], or [Bypass Tray].
If automatic tray selection is specified for the print job and multiple trays
contain valid paper, the first tray the machine finds will be used for printing;
when that tray runs out of paper, the machine automatically switches to the
next tray to continue printing.
Copier Select the tray that the machine checks first for paper that can be used for
the job from [Tray 1], [Tray 2], [Tray 3], or [Bypass Tray].
If [A4 SEF], [A4 LEF], [8 1/2 × 11 SEF], or [11 × 8 1/2 LEF] is selected for
[Select Paper] in the [Copier] page and multiple trays contain valid paper,
the first tray the machine finds will be used for printing; when that tray runs
out of paper, the machine automatically switches to the next tray to
continue printing.
• The information about Tray 2 and 3 appears only when it is installed.
Toner Management Tab
Toner Saving
Item Description
Toner Saving Enable this setting to print using a reduced amount of toner when printing
out copies.
Configuring the System Settings
169
To Next Page
Loading...
Need help?
General
