Changing Operation Modes
You can switch between copier and scanner modes by pressing the corresponding keys.
Press the [Copy] or [Scanner] key to switch to each mode. While operating in each mode, the
corresponding key lights up.
Function Priority
By default, the machine switches to the copier mode when it is turned on, or if the preset [System
Auto Reset Timer] time passes with the machine left idle while displaying the initial screen of another
mode. You can change the mode to switch to in such conditions using [Function Priority] under
[Admin. Tools].
• A password for accessing the [Admin. Tools] menu can be specified in [Admin. Tools Lock].
• For details about [System Auto Reset Timer] or [Function Priority], see page 151 "Administrator
Settings".
Changing Operation Modes
19
To Next Page
Loading...
