Specified Tray
Item Description
Specified Tray Select how print jobs using the paper tray are handled.
• Machine Settings
The paper settings configured on the machine's control panel are
applied to all print jobs. An error occurs when the paper settings
specified by the printer driver or the print command do not match the
machine's settings.
• Driver/Command Setting
When executing a print job specifying the paper tray, the paper
settings specified in the printer driver or in the print command are
applied regardless of the machine's settings.
Size mismatch detection
Item Description
Size mismatch
detection
Specify whether or not a buzzer sounds when the size of the paper in the
paper tray does not match that specified in the initial settings.
• The information about Tray 2 and 3 appears only when it is installed.
Copier Tab
Select Paper
Item Description
Select Paper Select the paper size used for printing copies from the following: [Tray 1],
[Tray 2], [Tray 3], [Bypass Tray], [A4 SEF], [A4 LEF], [8 1/2 × 11 SEF], or
[11 × 8 1/2 LEF].
When a tray is selected, the machine prints from that tray only. When a
paper size is selected, the machine checks the trays for the paper of the
specified size in the order of priority as set in [Copier] in the [Priority Tray]
tab.
If multiple trays contain valid paper, the first tray the machine finds will be
used for printing; when that tray runs out of paper, the machine
automatically switches to the next tray to continue printing.
8. Configuring the Machine Using Web Image Monitor
168
To Next Page
Loading...
Need help?
General
