Ricoh MP 2014 Series User Manual

• If printed envelopes come out badly creased, load the envelopes in the opposite direction. Also,
configure the printer driver to rotate the print object 180 degrees. For details about changing the
orientation see the printer driver Help.
• Environmental factors can degrade the print quality on both recommended and non-recommended
envelopes.
• If envelopes are severely curled after printing, flatten them by bending them back against the curl.
• After printing, envelopes sometimes have creases along their long edges and toner smear on their
unprinted sides. Print images might also be blurred. When printing large, black-solid areas, striping
can occur as a result of the envelopes overlapping.
• To correctly specify the length of an envelope whose flap opens along its short edge, be sure to
include the open flap when measuring.
CER112
• Fan envelopes, and then align their edges before loading.
DAC573
• When fanning envelopes, make sure they are not stuck together. If they are stuck together,
separate them.
• When fanning envelopes, make sure the envelope flaps are not stuck. If they are stuck, separate
them.
• Before loading envelopes, flatten them out so that their curl does not exceed that shown as shown
below.
2. Loading Paper
54

Ricoh MP 2014 Series Specifications

General

Functions	Print, Copy, Scan
Print Technology	Laser
Print Speed	20 ppm
Print Resolution	600 x 600 dpi
Copy Speed	20 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Supported Paper Sizes	A3, A4, A5, B4, B5
Multiple Copy	Up to 99 copies
Duplex Printing	Manual
Interface	USB 2.0
Dimensions	587 x 581 x 461 mm
Type	All in One Printer
Standard Paper Capacity	250 sheets
Operating System Compatibility	Windows, Mac
First Print Out Time	Less than 10 seconds