2S->2S(NoCom)
Makes 2-sided copies of 2-sided originals.
2S->2S Comb(2Orig)
Copies both sides of one 2-sided original to one side of a sheet, and both sides of another 2-sided
original to the other side of the sheet.
2S->2S Comb(4Orig)
Copies four 2-sided originals to one sheet with four pages per side.
1. Press the [Duplex/Combine] key.
2. Press the [ ] or [ ] key to select the desired copy mode, and then press the [OK] key.
3. Press the [ ] or [ ] key to select paper orientation and page order, and then press the
[OK] key.
4. Press the [Escape] key.
5. Place all 2-sided originals into the ADF with their fronts facing up.
6. Press the [ ] or [ ] key to select a paper tray.
7. Press the [Start] key.
• After you place the originals, press the [Start] key within the time specified in [System Auto Reset
Timer]. Otherwise, the job is canceled. For details, see page 151 "Administrator Settings".
• If the memory becomes full while originals are being scanned, the job is canceled.
4. Copying Originals
86
To Next Page
Loading...
