To Next Page

To Previous Page

symbols with the numeric keypad. All the input letters will be displayed in the

"Name Input Area".

6. Modify or delete the unwanted characters that have been input

During the name input process, you can modify or delete the unwanted

character if necessary. To delete the characters that have been input, click or

tap the Backspace key in the virtual keypad to delete the characters. To

modify the characters that have been input, delete the unwanted characters

first and then input the new characters.

You can directly move the cursor to the character to be modified or deleted,

delete the desired character or input the new characters after deleting the

unwanted character.

7. Confirm the input

After completing the input operation, click or tap "OK".

• Input Chinese Characters

Figure 4.17 Chinese Input Interface

1. Select Chinese input method

First check the input method type. If it shows "中/En", then go to Step 2; if it

shows "En/中", click or tap the input method switchover key to switch to

"中/En" (Chinese input method).

2. Clear the name input area

Quick Start

HDO1000 User Guide

Rigol HDO1000 Series User Manual

Other manuals for Rigol HDO1000 Series