Risco RW332M - Page 93

Page 87
Method: GSM
Parameter
Default
Range
GPRS
Allows programming parameters that relate for the communication over the GPRS
network.
Access Point Network (APN) Code
internet
To establish a connection to the GPRS network an APN (Access Point Name)
code is required. The APN code differs from country to country and from one
provider to another (the APN code is provided by your cellular provider).
The system supports an APN code field of up to 30 alphanumeric characters and
symbols (!, &, ? etc).
APN User Name
Enter APN user name (if required). The user name is provided by your
provider. The system supports a user name field of up to 20 alphanumeric
characters and symbols (!, &, ? etc).
APN Password
Enter the APN password (up to 20 alphanumeric characters and symbols.) as
provided by your provider (if required).
E-mail
The following programming parameters are used to enable sending Follow Me event
messages by e-mail through GPRS.
Note: To enable e-mail messaging, the GPRS parameters have to be defined.
Mail Host
The IP address or the host name of the SMTP mail server
SMTP Port
The port address of the SMTP mail server
Email address
The Email address that identifies the system to the mail recipient .
SMTP User Name
A name identifying the user to the SMTP mail server. The user name field can
include up to 10 alphanumeric characters and symbols (!, &, ? etc). Provision for
future functionality
SMTP Password
The password authenticating the user to the SMTP mail server. The password
can include up to 10 alphanumeric characters and symbols (!, &, ? etc). Provision
for future functionality