GSM Network Sensitivity (RSSI)
Set the minimum acceptable network signal level (RSSI level).
Options: Disabled (No troubles for low signal reception) / Low signal / High
signal
The SIM phone number. The system uses this parameter to receive the time from
the GSM network in order to update the system time.
Allows programming parameters that will be used when a prepaid SIM card is used in
the system.
Depending on the local network provider, the user can receive the credit level of the
prepaid SIM card by sending a predefined SMS command to a defined number. The
activation of the credit request can be done by the Grand Master.
⬧ SMS Credit Message: Type in the message command as defined by the
provider and the provider’s phone number to which the credit level SMS
message request will be sent
⬧ Voice Credit: N/A
⬧ Service Command: Type in the service command message as defined by the
provider
Phone to Get Credit Message
The provider’s phone number to which the credit level SMS message request
will be sent to or a call will be established, depending on the selection in the
Get Credit by parameter.
Phone to Receive SMS Credit Message:
The provider’s telephone number from which an automatic SMS credit status
message will be sent from.
To Next Page
Loading...
