Rockwell Automation Publication 450L-UM001D-EN-P - December 2019 185
Connected Components Workbench Software Chapter 9
3. The Connected Components Workbench software does not provide a
confirmation message. To confirm the export, follow the export file path.
Figure 167
shows the single zipped file.
Figure 167 - Zip File Confirmation
Import a Zip File
1. In Figure 168, right-click the device in the Project Organizer. Then click
Import. This process replaces the configuration of the selected device with
the imported configuration.
Figure 168 - Device > Import
In Figure 169, search for the directory that contains the desired file. The file type
must be 7z. Highlight the filename and click Open. The configuration is
imported into the selected Connected Components Workbench software device.
To Next Page
Loading...