Rockwell Automation Publication 450L-UM001D-EN-P - December 2019 197
Specifications Appendix A
Optional Accessories
Description Cat. No.
L-shaped end-cap mounting bracket kit (two per package), shipped with each stick (see
Standard Top/Bottom Mounting Kit on page 82
)
450L-AM-TBM
Side mounting bracket (2 per package) (see Side Mounting Bracket on page 84) 450L-AM-SM
Replacement Mounting Kit (see Replacement Mounting Kit on page 86) 450L-AM-RK
445L bracket (2 per package) 445L-AF6140
445L bracket (180°) (2 per package)
445L-AF6141
Power supply Output—24V DC, 3 amps, 72 W (see Power Supply on page 98) 1606-XLP72E
Laser alignment tool (see Alignment Tool and Bracket on page 202) 440L-ALAT
450L-B laser alignment tool bracket (see Alignment Tool and Bracket on page 202
) 450L-ALAT-C
Optical Interface Device (including USB cable) (see Optical Interface Device (OID) on
page 120)
450L-AD-OID
450L stick slot cover (plug-in slot, one red slot cover shipped with each 450L-B stick; one
red and one gray slot cover shipped with each 450L-E stick). (see Cascading on page 48
and Figure 5 on page 14)
450L-AS-1
Shock mount kit (one kit is required per stick) (see Shock Mounting Kit on page 86
) 445L-AF6142
Mounting stand (column) (see Mounting Columns on page 200) 440L-AMSTD
Mounting stand (column) (See publication 445L-UM004) 445L-AMSTD2M
Corner mirror (xxxx = 0300…1800 mm [11.8…70.86 in.] in 150 mm [5.9 in.]
increments) (see Mirrors on page 74
)
440L-AM075xxxx
Corner mirror (xxxx = 0300…1800 mm [11.8…70.86 in.] in 150 mm [5.9 in.]
increments) (see Mirrors on page 74)
440L-AM125xxxx
Mirror mounting bracket (see Corner Mirror on page 198) 442L-AF6106
Weld shield (xxxx = 0150…1950 mm [5.9…76.77 in.] in 150 mm [5.9 in.] increments)
(see Weld Shields on page 202
)
450L-AW-xxxx
T-connector (see T-connector on page 104) 1485P-RDR5
Safety Relay GSR SI (see Guardmaster SI Safety Relay on page 103) 440R-S12R2
GSR CI
440R-S13R2
GSR D 440R-D22R2
GSR DIS 440R-D22S2
Safety Relay MSR42
440R-P226AGS-NNR
Configurable Safety Relay CR-30 440C-CR30-22BBB
External contactor
100S:
100S-C09QJ14BC,
100S-C43QJ22BC
700S:
700S-CF53QDJBC
(or minor variations)
Test rod 14 mm (shipped with each stick that has finger resolution)
(see Regular Inspection on page 123)
450L-AT-14
Test rod 30 mm (shipped with each stick that has hand resolution)
(see Regular Inspection on page 123)
450L-AT-30
Test rod 40 mm (see Regular Inspection on page 123
) 450L-AT-40
Termination plug , M12, 8 pin (see Cascading and Blanking on page 52) 898D-81CU-DM
Termination cap, M12, 8 pin (see Cascading and Blanking on page 52) 1485A-M12
To Next Page
Loading...