130 Rockwell Automation Publication 450L-UM001D-EN-P - December 2019
Chapter 9 Connected Components Workbench Software
Start a New Project
The following example uses the Connected Components Workbench software
(version 12) loaded onto a Windows® 10 environment.
Figure 85
shows the Windows “Start” icon.
1. Click the windows “Start” icon in the lower left corner.
2. Scroll down to Rockwell Automation. Expand the selection and click
Connected Components Workbench.
Figure 85 - Start Menu
Figure 86 on page 131 shows the Start Page. This page allows you to do the
following:
•Create a project
•Open an existing project
•Open a recent project
• Open online training videos (requires an internet connection)
You can bypass this page by clearing the Show page on startup checkbox.
To Next Page
Loading...
Need help?
General