To Next Page
S
scottkimberlySep 8, 2025
How to enable Ethernet port on Rockwell Automation Touch terminals?
- MMatthew RyanSep 8, 2025
To enable the Ethernet port on your Rockwell Automation Touch terminal, go to Port Settings on the terminal.
How to enable Ethernet port on Rockwell Automation Touch terminals?
To enable the Ethernet port on your Rockwell Automation Touch terminal, go to Port Settings on the terminal.
How to enable Serial port on Rockwell Automation Allen-Bradley PanelView 800 Touch terminals?
To enable the serial port on your Rockwell Automation Touch terminal, go to Port Settings on the terminal.
What to do if there is a fatal hardware error on Rockwell Automation Allen-Bradley PanelView 800 Touch terminals?
If your Rockwell Automation Touch terminal displays a fatal hardware error, the suggested solution is to replace the terminal.
Why deletion of a recipe in a design secured application is not allowed on Rockwell Automation Allen-Bradley PanelView 800 Touch terminals?
If deletion of a recipe in a design secured application is not allowed on your Rockwell Automation Touch terminal, make sure the application is not design secured.
Why renaming of a recipe in a design secured application is not allowed on Rockwell Automation Allen-Bradley PanelView 800?
If renaming of a recipe in a design secured application is not allowed on your Rockwell Automation Touch terminal, make sure the application is not design secured.
Why cannot disable both communication port on Rockwell Automation Touch terminals?
If you are unable to disable both communication ports on your Rockwell Automation Touch terminal, make sure that at least one communication port is enabled.
What name is allowed for Rockwell Automation Allen-Bradley PanelView 800 Touch terminals?
If the name cannot be blank and must contain only alphanumeric characters plus [ $'@!()_- ] on your Rockwell Automation Touch terminal, make sure the name contains only alphanumeric characters plus [ $'@!()_- ].
Why Invalid Control password on Rockwell Automation Touch terminals?
If you encounter an invalid control password on your Rockwell Automation Touch terminal, make sure your password contains at least one special character.
What to do if Recipe Name cannot contain more than 31 characters on Rockwell Automation Touch terminals?
If the recipe name cannot contain more than 31 characters on your Rockwell Automation Touch terminal, make sure the recipe name does not exceed 31 characters. Choose another name.
How to edit recipe for running application on Rockwell Automation Allen-Bradley PanelView 800?
If you cannot edit a recipe for a running application on your Rockwell Automation Touch terminal, unload the application and try again.
General| Display Type | TFT LCD |
|---|---|
| Power Supply | 24V DC |
| Programming Software | Connected Components Workbench |
| Enclosure Rating | IP65 |
| Shock | 30 g |
| Touch Technology | Resistive |
| Communication Ports | Ethernet, USB |
| Operating Temperature | 0 to 50 °C |
| Processor | 400 MHz |
| Storage Temperature | -20 to 60 °C |
| Humidity | 5% to 95% non-condensing |
| Vibration | 5-500 Hz |
| Power Consumption | 10 W |
| Certifications | CE, UL, cUL |
| Display Size | 4.3" or 7" |
| Resolution | 480 x 272 (4.3"), 800 x 480 (7") |
Consolidates warnings regarding hazardous environments, injury, property damage, and temperature hazards.
Covers manual purpose, download sources, change summaries, audience, and additional resources.
Details how to obtain firmware updates and lists related publications.
Provides an overview of PanelView 800 terminals and their basic functions.
Explains browser connection, PanelView Explorer, and peripheral connections.
Lists available PanelView 800 terminal catalog numbers and specifications.
Describes terminal configuration via browser interface and on-terminal settings.
Covers adjusting various terminal settings like language, date/time, and system info.
Details exporting, importing, and managing applications, recipes, and alarm history.
Covers viewing terminal system information and changing date/time settings.
Details Ethernet and Serial port configurations, including IP addressing.
Explains configuring PanelView Explorer settings like browser connection and terminal settings.
Covers setting, changing, and clearing terminal passwords for security.
Explains restricting access to screens and managing user accounts for security.
Details assigning design and access rights to user accounts for application security.
Describes how security functions during runtime and the idle mode timeout.
Explains the PanelView 800 protected mode for enhanced terminal security.
Introduces VNC for remote terminal connection and interaction.
Guides on setting up VNC server, access modes, and passwords.
Details how to set view-only or control access passwords for VNC connections.
Provides steps to establish a VNC connection using a viewer application.
Explains how to view terminal system information for troubleshooting.
Details terminal alerts, IDs, descriptions, and corrective actions for troubleshooting.
Describes interpreting splash screen messages and status codes for diagnostics.
Explains how to diagnose issues using Comm and Fault LED indicators during startup.
Provides steps to reset the terminal to its factory default state.
Outlines essential steps and considerations before updating terminal firmware.
Details the process of upgrading terminal firmware using the ControlFLASH software.
Explains installing firmware using USB drives or microSD cards.
Guides on extracting RFU files from DMK files for firmware updates.
Details transferring firmware files to USB or microSD storage.
Shows locations for inserting microSD memory cards in PanelView 800 terminals.
Illustrates where USB drives can be inserted into the terminals.
Guides on replacing the terminal's internal lithium battery for clock backup.
Provides essential wiring and safety recommendations for device connections.
Details cable connections to MicroLogix and Micro800 controllers.
Explains Ethernet connection, RJ45 connector, and pinout details.
Covers RS-232 and RS-422/485 serial port functionalities and pinouts.
Describes USB device and host ports, including USB drive usage.
Guides on adding CompactLogix 5370/5380 controllers to PanelView 800 applications.
Explains how to map PanelView 800 terminal tags to CompactLogix controller tags.
Details the validation process for PanelView applications communicating with CompactLogix controllers.
Provides steps to download PanelView applications to the terminal.
Explains how to upload applications from the terminal.
Describes addressing formats for CompactLogix 5370/5380 controllers in PanelView 800.
Outlines how to configure PanelView 800 terminals using PanelView Explorer.
Details using the browser interface for terminal configuration and settings.
Explains how to change the terminal's display language using PanelView Explorer.
Guides on modifying the terminal display brightness via PanelView Explorer.
Details enabling/disabling screen savers, modes, and timeout via PanelView Explorer.
Explains replacing the default screen saver image with a custom bitmap.
Covers adjusting key repeat rate and delay using PanelView Explorer.
Guides on calibrating the touch screen using PanelView Explorer.
Details how to restart the terminal using the PanelView Explorer interface.
Explains how to select the startup application using PanelView Explorer.
Guides on adjusting date, time, and daylight savings via PanelView Explorer.
Describes enabling user login security for the PanelView Explorer Startup window.
Covers exporting/importing applications, images, security files, and recipes.
Explains how to add new fonts to the terminal using PanelView Explorer.
Details importing Windows CE fonts to the terminal via PanelView Explorer.
Explains how to remove unused font files from the terminal.
