Rohde & Schwarz FSW26 - Page 921

Remote Commands
R&S
®
FSW
921User Manual 1173.9411.02 ─ 19
Parameters:
<State> ON | OFF
*RST: OFF
Example:
CALC:MATH:STAT ON
Turns on trace mathematics.
Usage: SCPI confirmed
Manual operation: See "Trace Math Function" on page 469
See "Trace Math Off" on page 470
11.8.2.4 Retrieving Trace Results
This chapter describes how to retrieve data from standard traces.
For spectrograms see also chapter 11.8.3.6, "Marker Search (Spectrograms)",
on page 944.
For details on the format of the retrieved trace data see also chapter 11.8.2.5, "For-
mats for Returned Values: ASCII Format and Binary Format", on page 925.
Commands required to export traces (and other result data) are described in chap-
ter 11.9.5, "Storing Measurement Results", on page 1011.
FORMat[:DATA].............................................................................................................921
TRACe<n>[:DATA].........................................................................................................922
TRACe<n>[:DATA]:MEMory?..........................................................................................924
TRACe<n>[:DATA]:X?....................................................................................................924
FORMat[:DATA] <Format>
This command selects the data format that is used for transmission of trace data from
the R&S FSW to the controlling computer.
Note that the command has no effect for data that you send to the R&S FSW. The
R&S FSW automatically recognizes the data it receives, regardless of the format.
For details on data formats see chapter 11.8.2.5, "Formats for Returned Values: ASCII
Format and Binary Format", on page 925.
Analyzing Measurements (Basics)