Rohde & Schwarz SML01 - Page 215

R&S®SML / R&S®SMV03 SOURce:STEReo
1090.3123.12 E-6 6.37
[:SOURce]:STEReo:RDS
Com
mands to the basis RDS functions which can also be operated manually are under this node.
[:SOURce]:STEReo:RDS:DATaset DS1 | DS2 | DS3 | DS4 | DS5
Selection and activation of the RDS data sets DS1 to DS 5.
Example: :SOUR:STER:RDS:DAT DS5 *RST value is DS1
[:SOURce]:STEReo:RDS[:DEViation] 0 to 10 KHz
Setting value of the frequency deviation of the RDS subcarrier.
Example: :SOUR:STER:RDS 5 kHz *RST value is 2 kHz
[:SOURce]:STEReo:RDS:STATe ON | OFF
Switching on/off RDS function.
Example: :SOUR:STER:RDS:STAT ON *RST value is OFF
[:SOURce]:STEReo:RDS:TRAFfic:PROGram:STATe ON | OFF
Switchung on/ofF traffic program.
Example: :SOUR:STER:RDS:TRAF:PROG:STAT ON *RST value is OFF
[:SOURce]:STEReo:RDS:TRAFfic:ANNouncement[:STATe] ON | OFF
Switching on/off traffic announcement.
Example: :SOUR:STER:RDS:TRAF:ANN ON *RST value is OFF
[:SOURce]:STEReo:SOURce LREXt | SPEXt | LFGen
Selection of the modulation sources for stereo modulation (the modulation sources cannot be
used simultaneously).
LREXt Activates the L and R inputs for external analog modulation signals.
SPEXt Activates the S/P DIF input for the external digital modulation signal.
LFGen The modulation signal is generated by the internal LF generator.
Example: :SOUR:STER:SOUR LFGEN *RST value is LREX
[:SOURce]:STEReo:STATe ON | OFF
Switching on/off stereo modulation.
Example: :SOUR:STER:STAT ON *RST value is OFF