Rohde & Schwarz SMW-K144 - Page 111

5G New Radio Configuration and Settings
R&S
®
SMW-K144
111User Manual 1178.8013.02 ─ 06
DCI format 0_1 is scrambled by C-RNTI, CS-RNTI or SP-CSI-RNTI and carries the fol-
lowing information:
DCI field Remote command: Remark
UL/SUL Indicator [:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:USINd on page 244
If "Node >
Carrier >
SUL = On"
Frequency Domain Resource
Assignment
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:FRDRes
on page 240
Time Domain Resource Assign-
ment
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:TIDRes
on page 240
Modulation and Coding Scheme
(TB1)
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:TB1:MCS
on page 241
New data Indicator (TB1) [:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:TB1:NDI
on page 241
Redundancy Version (TB1) [:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:TB1:RV
on page 241
HARQ Process Number [:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:HAPRoc
on page 242
CORESET Settings