Rohde & Schwarz SMW-K144 - Page 240

Remote-Control Commands
R&S
®
SMW-K144
240User Manual 1178.8013.02 ─ 06
Return values:
<PatternHigh> 64 bits
Example: See Example "Configuring the CORESET settings"
on page 157.
Usage: Query only
Manual operation: See "Bit Data > Pattern" on page 109
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DCI<s2us0>:FRDRes <FreqDomResAssig>
Sets the DCI field frequency domain resource assignment.
Parameters:
<FreqDomResAssig> integer
Range: 0 to 65535
*RST: 0
Example: See Example "Configuring the CORESET settings"
on page 157.
Manual operation: See "DCI Format 0_0" on page 109
See "DCI Format 0_1" on page 110
See "DCI Format 1_0" on page 112
See "DCI Format 1_1" on page 113
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DCI<s2us0>:TIDRes <TimeDomResAssig>
Sets the DCI field time domain resource assignment.
Parameters:
<TimeDomResAssig> integer
Range: 0 to 15
*RST: 0
Example: See Example "Configuring the CORESET settings"
on page 157.
Manual operation: See "DCI Format 0_0" on page 109
See "DCI Format 0_1" on page 110
See "DCI Format 1_0" on page 112
See "DCI Format 1_1" on page 113
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DCI<s2us0>:FRHFlag <FreqHopFlag>
Sets the DCI field frequency hopping flag.
CORESET Commands