Rohde & Schwarz SMW-K144 - Page 263

Remote-Control Commands
R&S
®
SMW-K144
263User Manual 1178.8013.02 ─ 06
Parameters:
<TrigExtDelay> float
Range: 0 to 2147483647
Increment: 0.01
*RST: 0
Example: See Example "Configure and enable triggering" on page 162.
Manual operation: See "(Specified) External Delay/(Specified) Trigger Delay"
on page 129
[:SOURce<hw>]:BB:NR5G:TRIGger[:EXTernal]:INHibit
<TrigExtInhibit>
Specifies the duration by which a restart is inhibited.
Parameters:
<TrigExtInhibit> integer
Range: 0 to dynamic
*RST: 0
Example: See Example "Configure and enable triggering" on page 162.
Manual operation: See "External / Trigger Inhibit" on page 128
[:SOURce<hw>]:BB:NR5G:TRIGger:EXTernal:RDELay?
Queries the time (in seconds) an external trigger event is delayed for.
Return values:
<ResExtDelaySec> float
Range: 0 to 688
Increment: 250E-12
*RST: 0
Example: See Example "Specifying delay and inhibit values in time units"
on page 163.
Usage: Query only
Manual operation: See "Actual Trigger Delay/Actual External Delay" on page 129
[:SOURce<hw>]:BB:NR5G:TRIGger:EXTernal:TDELay <TrigExtTimeDel>
Specifies the trigger delay for external triggering. The value affects all external trigger
signals.
Parameters:
<TrigExtTimeDel> float
Range: 0 to 688
Increment: 250E-12
*RST: 0
Trigger Commands